Friday, January 22, 2021

Champion Oil Introduces a Professional Grade 80% Ether Starting Fluid

If you've ever used it, you know what it is. Starting Fluid is an extremely flammable product that can get you out of many a jam. It works like a pinch hitter when all else fails. 

Earlier this week Champion Oil announced a Professional Grade 80% Ether Starting Fluid that's designed for both gas and diesel engines in cold weather. What follows is information from the press release.

“Starting fluid is a volatile, flammable liquid which is used to aid the starting of internal combustion engines, especially during cold weather or in engines that are difficult to start using conventional starting procedures,” stated Karl Dedolph of Champion Brands, LLC. “It is typically available in an aerosol spray can, and may sometimes be used for starting direct injected diesel engines or lean burn spark engines running on alcohol fuel. 
https://www.championbrands.com/80-ether-starting-fluid/

 

“Modern starting fluid products contain mostly volatile hydrocarbons such as heptane, (the main component of natural gasoline) with varying portions of diethyl ether and carbon dioxide as the propellant helping start internal combustion engines because of its low 160 °C (320 °F) autoignition temperature.” 

 

“Starting fluid is sprayed into the engine intake near the air filter, or into the carburetor bore or a spark plug hole of an engine to get added fuel to the combustion cylinder quickly”, added Dedolph. “Using starting fluid to get the engine running faster avoids wear to starters and fatigue to one's arm with pull start engines, especially on rarely used machines."

 

Other uses include cold weather starting, vehicles that run out of fuel and thus require extra time to restore fuel pressure, and sometimes with flooded engines. Mechanics sometimes use it to diagnose starting problems by determining whether the spark and ignition system of the vehicle is functioning; if the spark is adequate but the fuel delivery system is not, the engine will run until the starting fluid vapors are consumed.

 

“It is used more often with carbureted engines than with fuel injection  systems. Caution is required when using starting fluid with diesel engines that have preheat systems in the intake or glow-plugs installed, as the starting fluid may pre-ignite, leading to engine damage,” Dedolph added.

 

Champion Professional Grade 80% Ether Starting Fluid works great on gas and diesel engines, allowing faster starts and reducing wear on batteries. It contains upper cylinder lubricant for added protection. Use of personal protective equipment as required. Wash face, hands any exposed skin thoroughly after handling. 
https://www.championbrands.com/80-ether-starting-fluid/

 

Do not eat, drink or smoke when using this product. Use only outdoors or in well-ventilated areas. Wear eye/face protection. Do not breathe dust/fumes/gas/mist/spray/vapors. Keep away from heat/sparks open flames/hot surfaces. This product is compliant for sale in North America. Part# 4580K 12/11 oz.

 

About the Company
Champion Brands, LLC, is a globally recognized industry leader in specialty lubricants for over 65 years. Champion also produces and blends over 350 products including fuel, oil, engine additives, and lubricants for the racing, automotive, heavy truck, agricultural, industrial, and specialty markets. For more information about Champion Products contact your nearest Champion Distributor, or call Champion at 660-890-6231. Champion Brands, LLC; 1001 Golden Drive, Clinton, MO, 64735 or go to http://www.championbrands.com

1 comment:

  1. Too Much? Warning- if you have to use starting fluid, use it sparingly. If a couple short bursts of spray into the intake doesn't produce a cough from the motor, too much isn’t going to help.

    ReplyDelete


MOST POPULAR POSTS